Diagnose
- Receiving and inspection.
- Inspection for outer damages of the endoscope.
- Single checking of light-fibres under the microscope.
- Examination of the optical system with a camera.
- Checkup of the mechanical parts.
- Checking of the light connection.
Repair
- Opening of the endoscope.
- Determination of defect parts and the general repair requirements.
- Disassembling and examination of the ocular unit under the microscope.
- Disassembling of the optical system with special tools.
- Substitution of all necessary optical parts.
- Cleaning and re-installation of the optical system under the microscope.
- If required replacing of mecanical small parts.
- Removal of humidity out of the system
- Optical precise adjustment of the endoscope by camera and adjustment device.
- Assembly of the endoscope using caloric engine technique
- Closure of the optics via hot air proceeding
Inspection
- Hydrostatic testing of the endoscope with especially developed hot / cold water methode.
- Examination of the endoscopes optics, using camera, microscope and magnifier.
- Checking the optics with a camera, microscope and magnifying glass.
- Operational test (testing of angle and image definition).
- Testing of the light-outlet cone and the single fibres of the light conductor
- Checking of all mechanical connexion parts of camera and light-supply.
- Final inspection via camera system.
- External control and final cleaning.
Safety
Packaging :
- To warrant a safe transport of your new or repaired units, we use special wrappings to protect the items sufficiently against hits, shocks, drop etc. during transport..
